Monday, June 25, 2012

Revamp a Nightstand - Tutorial

original boring nightstand

step 1
gather supplies - sanding block, tack cloth, spray primer, colored spray paint, clear varnish, tint, rag. 

step 2
sand nightstand.
step 3
wipe with tack cloth to remove sanded particles.

step 4
prime with spray primer. once primer is dry, coat with colored spray paint.

step 5
sand edges.

step 6
dip rag in tint. rub onto nightstand. let sit for about 30 seconds - 1 minute. dampen rag. remove wipe down nightstand removing excess.

step 7
once tint has dried. coat with clear varnish.


No comments:

Post a Comment

Please be sure to leave an active email address if you would like feedback. Thanks so much for stopping by.